Connect Karl & Karl big with the Stadler Form App
Here, you'll find out how to connect your humidifier Karl, or Karl big, with the Stadler Form app. Monitor the air quality and control your humidifier from anywhere.
Important note for Android users
In order for your Android device to establish a proper connection to the app, you must make additional settings on your Android device.
Click here to access the step-by-step guide.
The Stadler Form App
With this app, you can make even more efficient use of your Stadler Form indoor climate devices. Control one or more Stadler Form devices remotely. To control devices that have Wi-Fi capability, you need the app as well as an account. Download the app from the App Store or via Google Play, install it, and register.
Download the app and open it. If you already have an account, you can log in using your user data. If you're new, you'll need to register first.
Make sure that the Wi-Fi connection and Bluetooth on your smartphone are enabled. Select the Wi-Fi network you'll be using to connect the device later.
Turn on your Karl or Karl big. Ensure that the LED at the bottom of the Wi-Fi button is flash. If the dot isn't visible or does not flash, press the Wi-Fi button for 3 seconds until the dot starts to flash rapidly. To see the LED, you must stand directly above the unit and look down.
Karl or Karl big will now automatically appear in the app under "Discovering devices". Simply click "Add," wait until he's connected, and you're good to go.
If Karl or Karl big doesn't appear automatically, click the "+" icon in the top right corner of the main menu, then select "Add Device."
Next, choose Karl or Karl big from the overview.
Afterwards, select a 2.4 GHz Wi-Fi network and enter the corresponding password.
Karl or Karl big must be in pairing mode for a connection to be established. According to the app, check that the LED on the bottom of the Wi-Fi button is blinking. Once the LED is flashing, confirm this and click "Next."
Now, the pairing process begins. After a few seconds, the LED on the bottom of the Wi-Fi button on Karl or Karl big will stay lit steadily, indicating that the app has located the device.
The device is now added to the app.
Karl or Karl big is now connected and successfully added in the app. Click "Done" now.
Done! You can now control Karl or Karl big through the app. By the way, you can exclusively activate the child lock in the app. This feature prevents the buttons on the device itself from being operated.
Support
How can we help you?
Your request will be answered from Monday to Thursday if possible within 24 hours. On Fridays and during the weekend it might take a little longer.
Note for Tuya app users
If you have been using the "Smart Life – Smart Living" app from Tuya for your Stadler Form devices, you can continue to do so. However, it's not possible to have a device stored and operated in both apps. We recommend switching to the Stadler Form app, as it will be further developed to provide an even better experience in the future. Please note that when you switch, you'll need to create a new account for the Stadler Form app and re-register your Stadler Form devices.
FAQs
Un seul compte peut être associé à l'appareil.
Dans ton compte app Stadler Form, tu peux toutefois partager l'accès à la commande de ton appareil avec d'autres personnes. Pour cela, va sur l'appareil souhaité, clique en haut à droite sur Paramètres et sélectionne « Partager l'appareil ». Ici, tu peux partager l'accès.
- Redémarre ton téléphone portable
- Éteins le routeur ou ton WiFi, attends 30 secondes et rallume le routeur
- Ensuite, tu peux essayer à nouveau d'ajouter automatiquement Karl ou Karl big, comme décrit dans le mode d'emploi
Remarque importante pour les utilisateurs Android
Pour que ton appareil Android puisse se connecter correctement à l'application, tu dois impérativement effectuer des réglages supplémentaires sur ton appareil Android. Clique ici pour accéder aux instructions étape par étape.
Karl ou Karl big peuvent être facilement déconnectés de l'appli. Pour cela, va dans l'app et efface l'appareil. Ou alors, appuie pendant 3 à 5 secondes sur le bouton WiFi de ton humidificateur. Lorsque le bouton commence à clignoter, la connexion entre ton Karl ou Karl big et l'app a été coupée.
Si la LED située sous l'icône WiFi est allumée en permanence, cela signifie que ton humidificateur est connecté à l'application.
Après la connexion de Karl ou Karl big à l'app Stadler Form, il faut attendre quelques secondes avant que les données mesurées n'apparaissent dans l'app.
Non, actuellement les appareils Stadler Form ne sont pas intégrables à HomeKit.
Assure-toi que,
- que ton Karl ou Karl big soit correctement branché et allumé
- ton smartphone est connecté au wifi et au Bluetooth
- le réseau sans fil sur Karl ou Karl big est activé. Si ce n'est pas le cas, maintiens le bouton Wi-Fi enfoncé pendant 3 secondes.