Connect Eva with the Stadler Form App
Here, you'll find out how to connect your humidifier Eva, with the Stadler Form app. Monitor the humidity and control your air humidifier from anywhere. Starting from the production year 2021, Eva is equipped with Wi-Fi capabilities.
Important note for Android users
In order for your Android device to establish a proper connection to the app, you must make additional settings on your Android device.
Click here to access the step-by-step guide.
The Stadler Form App
With this app, you can make even more efficient use of your Stadler Form indoor climate devices. Control one or more Stadler Form devices remotely. To control devices that have Wi-Fi capability, you need the app as well as an account. Download the app from the App Store or via Google Play, install it, and register.
Download the app and open it. If you already have an account, you can log in using your user data. If you're new, you'll need to register first.
Make sure that the Wi-Fi connection and Bluetooth on your smartphone are enabled. Select the Wi-Fi network you'll be using to connect the device later.
Turn on your Eva. Make sure that Eva's water level indicator is blinking. This indicates that Wi-Fi is active. To activate Wi-Fi on Eva, press the Night Mode button for 5 seconds. The water level indicator will start flashing quickly.
Eva will now automatically appear in the app under "Discovering devices". Simply click "Add," wait until she's connected, and you're good to go.
If Eva doesn't appear automatically, click the "+" icon in the top right corner of the main menu, then select "Add Device."
Next, choose Eva from the overview.
Afterwards, select a 2.4 GHz Wi-Fi network and enter the corresponding password.
Eva needs to be in pairing mode for a connection to be established. To achieve this, according to the app's instructions, verify that the water level indicator is blinking. Once it's flashing rapidly, confirm this and click "Next."
Now, the pairing process begins. After a few seconds, Eva's water level indicator will light up steadily, indicating that the app has located the device.
The device is now added to the app.
Eva is now connected and successfully added in the app. Click "Done" now.
Done! You can now control Eva through the app. By the way, you can exclusively activate the child lock in the app. This feature prevents the buttons on the device itself from being operated.
Support
How can we help you?
Your request will be answered from Monday to Thursday if possible within 24 hours. On Fridays and during the weekend it might take a little longer.
Note for Tuya app users
If you have been using the "Smart Life – Smart Living" app from Tuya for your Stadler Form devices, you can continue to do so. However, it's not possible to have a device stored and operated in both apps. We recommend switching to the Stadler Form app, as it will be further developed to provide an even better experience in the future. Please note that when you switch, you'll need to create a new account for the Stadler Form app and re-register your Stadler Form devices.
FAQs
- Redémarre ton téléphone portable
- Éteins ton routeur ou ton Wi-Fi, attends 30 secondes et rallume le routeur
- Ensuite, tu peux essayer à nouveau d'ajouter automatiquement Eva, comme décrit dans les instructions
- Si le « timeout » persiste, ajoute Eva manuellement
Lorsque l'indicateur de niveau d'eau sur le devant de l'appareil est allumé et qu'Eva est en même temps visible dans l'application.
Un seul compte peut être associé à l'appareil.
Dans ton compte App Stadler Form, tu peux toutefois partager l'accès pour la commande de ton appareil avec d'autres personnes. Pour cela, va sur l'appareil souhaité, clique en haut à droite sur Paramètres, sélectionne « Partager l'appareil ». Ici, tu peux donner des accès.
Remarque importante pour les utilisateurs Android
Pour que ton appareil Android puisse se connecter correctement à l'application, tu dois impérativement effectuer des réglages supplémentaires sur ton appareil Android. Clique ici pour accéder aux instructions étape par étape.
Il est très facile de déconnecter l'appareil de l'app. Pour cela, va dans l'app et supprime Eva. Ou alors, appuie 3 à 5 secondes sur le bouton mode nuit d'Eva. Lorsque l'indicateur de niveau d'eau commence à clignoter, cela signifie que la connexion entre l'appareil et l'app a été coupée.
- que ton Eva soit correctement branché et allumé
- ton smartphone est connecté au wifi et au Bluetooth
- le réseau sans fil est activé sur Eva. Si ce n'est pas le cas, maintiens le bouton « mode nuit » enfoncé pendant 3 secondes.
Après la connexion d'Eva à l'app Stadler Form, il faut quelques secondes pour que les données mesurées apparaissent dans l'app.
Non, actuellement les appareils Stadler Form ne sont pas intégrables à HomeKit.