Product information Charly little
The fan Charly has already achieved cult status. The exceptional wind machine is now equipped with oscillation. The ventilator Charly thereby distributes the cool air steadily in the room. With a design resembling a jet aircraft turbine and an air-moving performance to match: three aluminium blades allow this fan to shift up to 3300 cubic meter of air an hour. But thanks to his rounded, die-cast zinc base, Charly remains firmly anchored on the ground, while it is still adjustable.
Product family | Fan |
---|---|
System | Floor fan |
Color | silver |
Capacity | 3300 m3/h |
Power level | 3 |
Power consumption | 25 – 45 W |
Noise level | < 52 dB(A) |
Weight | 3.5 kg |
Dimensions | 352 x 395 x 270 mm |
Instruction manual and more
Video tutorials
Please read through the operating instructions carefully before you use the appliance for the first time and keep them safely for later reference; if necessary pass them on to the next owner.
- Stadler Form refuses all liability for loss or damage which arises as a result of failure to follow these operating instructions.
- The appliance is only to be used in the home for the purposes described in these instructions. Unauthorised use and technical modifications to the appliance can lead to danger to life and health.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
- Never leave any parts of the packing within the reach of children.
- Check the condition of the appliance after removing it from the packaging. Ensure that all component parts of the appliance are within the packaging and have not been damaged (see description of the appliance).
- Assemble the appliance in accordance with the instructions for Assembly. Follow the instructions for assembly exactly and ensure that all screws are firmly tightened so as to avoid damage and hazards.
- Never insert objects into the grille of the fan. Do not cover the appliance during operation.
- Always disconnect the power cord from the socket before removing the protection grille.
- Only connect the cable to alternating current. Observe the voltage information given on the appliance.
- Do not use damaged extension cords.
- Do not run the power cord over sharp edges and make sure that it does not get trapped.
- Do not pull the plug from the socket with wet hands or by holding on to the power cord.
- Do not use the appliance in immediate vicinity of a bath tub, a shower or a swimming pool (observe a minimum distance of 3m). Place the appliance such that a person in the bath tub cannot touch the appliance.
- Do not place the appliance near a heat source. Do not subject the power cord to direct heat (such as a heated hotplate, open flames, hot iron sole plates or heaters for example). Protect power cords from oil.
- See to it that the appliance is properly positioned to ensure a high stability during its operation and make sure that no one can trip over the power cord.
- The appliance is not splash-proof.
- For indoor use only.
- Do not store the appliance outdoors.
- Store the appliance in a dry place inaccessible to children (pack the appliance).
- If the supply cord is damaged, it must be replaced by the manufacturer, or its service agent, or a qualified person in order to avoid a hazard.
- Prior to any maintenance, cleaning and after each use, switch off the appliance and unplug the mains cable from the socket.
- Repairs to electrical appliances must only be carried out by a qualified electrical technician.
Good to know
Find important information here
Charly little’s motor housing is connected to his telescopic tube by means of a socket screw located on the side. This can work loose over time. You can secure Charly little’s head in an upright position by tightening the screw.

To clean the fan blade, remove the securing screw, undo all the fixing clips and carefully remove the protective grille from the front. Now you can wipe the fan blade with a damp cloth and then dry it thoroughly. After cleaning, put the protective grille back on the device (fit the top positioning clip), fasten all the fixing clips and tighten the securing screw firmly.
Accessories

Charly little
The Designer
Since the very start, I have had the privilege to co-develop and design products for Martin Stadler and the Stadler Form Team. What began with Fred, has grown into an attractive, small but fine range of products. This experience, and being part of the team, has greatly enriched myself and my work as a designer ...
