Product information Albert

Where humid rooms are a nightmare, the dehumidifier Albert feels right at home! On the ground floor or in the basement, in the house by the water or even in the laundry, Albert is an efficient dehumidifier. The swing function of the air outlet ensures optimal air distribution. The dehumidifier Albert avoids efficiently mold in any room.

Product family Dehumidifier
System Compressor
Color white
Room size m² 70
Room size m³ 175
Capacity 20 l
Power level 3
Power consumption 270 W (26.7°C 60% RH)
Water tank capacity 4.6 l
Noise level 33 – 44 dB(A)
Weight 13.3 kg
Dimensions 350 x 655 x 252 mm

Awards

Please read through the operating instructions carefully before you use the appliance for the first time and keep them safely for later reference; if necessary pass them on to the next owner.

  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
  • If the supply cord is damaged, it must be replaced by the manufacturer, or its service agent, or a qualified person in order to avoid a hazard.
  • Stadler Form refuses all liability for loss or damage that arises as a result of failure to follow these operating instructions.
  • For indoor use only.
  • Do not store the appliance outdoors.
  • Place the dehumidifier on a firm, even, waterproof surface. Make sure it is standing securely so that the dehumidifier cannot tip over or fall down. If it tipped over, please pull out the plug at once. Water can damage furniture and floor coverings.
  • Unwind the cord completely. An incompletely unwound cord can lead to overheating and cause a fire.
  • Do not use an extension cord, a multiway connector, or a continuously adjustable speed controller. This can cause overheating, fire, or electric shock.
  • Connect the dehumidifier only to a single-phase socket with the supply voltage as stated on the type plate.
  • Always switch the dehumidifier off with the power key and always disconnect the plug from the power socket when the dehumidifier is not in use, or when it is moved, handled or cleaned. Do not tug at the cord to disconnect the plug. Do not disconnect the plug when the dehumidifier is running. Always first switch the dehumidifier off with the power key.
  • The dehumidifier functions optimally at a room temperature of between 13 °C and 35 °C. The specified dehumidifying performance is only achievable in the higher temperature range (from 22 °C) and with higher room humidity (from 70%). The lowest recommended operating temperature is 5 °C. In case of lower temperatures, the DEFROST mode is activated too frequently. The highest operating temperature is 35 °C and the relative humidity is 90%.
  • Do not use the dehumidifier anywhere near easily inflammable gases or substances, near an open fire, or at a location where oil and water could splash. Do not spray insecticides or similar substances onto the dehumidifier. Make sure that the dehumidifier is not exposed to direct sunlight. Do not use the dehumidifier in a hothouse or near a bathtub, shower or swimming pool. Do not put any hot or heavy objects on the dehumidifier.
  • The air intake and air outflow vents must always be kept open during dehumidification. Make sure that no objects can get into the air intake or air outflow vents. This can lead to overheating, fire or electric shock. The dehumidifier must not be installed behind curtains, drapes or other objects and obstacles that could impair the air circulation. A safety distance of at least 50 cm from other objects must be maintained. In addition, a safety distance of at least 60 cm from wet areas such as showers, washbasins, sinks, bathtubs etc. must be maintained. A safety distance of 120 cm from the water supply, e.g. a water tap, is necessary.
  • When operating to dry clothes keep the clothing at least 50 cm away from the unit and do not allow water to drip onto the unit.
  • Do not remove the water tank while the dehumidifier is running. Drops of remaining water could damage furniture and floor-coverings.
  • Wait for 3–5 minutes after switching the dehumidifier off before you switch it back on again.
  • Do not immerse the dehumidifier into water or any other liquids and do not pour water or any other liquids onto the appliance or into the air intake and air outflow vents.
  • Clean the dehumidifier regularly, following the cleaning instructions.
  • Always transport the dehumidifier in an upright position. Before using the dehumidifier for the first time, leave it standing in an upright position for 24 hours. Always stand the dehumidifier in an upright position immediately after transporting the appliance, and wait for at least 60 minutes before switching it back on. The water tank must be emptied every time before transport.The dehumidifier must always be operated according to this instruction manual. Non-observance of these instructions can lead to injuries, a fire, electric shock or faults in the appliance.
  • The dehumidifier is designed for private use indoors and is not intended for commercial use.
  • Do not use the dehumidifier if it is faulty or could show signs of damage, or if it is not functioning correctly. Disconnect the plug from the power socket.
  • The appliance shall be installed in accordance with national wiring regulations.
  • Details of type and rating of fuses: Walter: 2010 serie(s); AC 250V; T;5A or 6.3A, 2A or 2.5A.

Swing function

Thanks to the air outlet swing function, Albert ensures optimal air distribution.

Integrated hygrostat

Albert is equipped with a hygrostat so the dehumidifier will switch off automatically once the desired humidity is reached and switch himself back on again if the humidity rises above the desired level.

Practical features

Albert operates quietly and is equipped with Night mode so you are guaranteed to get a good night’s sleep.

Good to know

Find important information here

If you want to connect the device directly to the water outlet, you can insert the drainage hose into the device. For easier handling, we recommend removing the water tank. Then connect the hose to the internal drain valve on the back of Albert. Put the water tank back and place the other end of the drainage hose directly over the water outlet. Please note that the outflow end of the hose should be lower than the inflow end so that the water can drain off.

Yes, Albert has a memory of 24 hours and switches on again after a power failure.  For that reason, he can also be operated using a timer.

If you use Albert for a long period of time or if the air in the room is polluted, the water outlet can become blocked. If that is the case, the water will no longer be able to flow into the water tank properly and will leak out. As a result, you may find small pools of water underneath or near to the unit. Click on the link for brief instructions on how to clean the water outlet. If the problem persists, please contact your local service department to arrange for your Albert to be inspected.

Unfortunately, this is due to a technical fault. Please return your Albert to the retailer from whom you purchased the device. If you live in Switzerland, you can return the device to us directly using the service form which can be found by going to www.stadlerform.com/service.

Accessories

Average rating of 5 out of 5 stars

(0)

Average rating of 5 out of 5 stars

(1)

Average rating of 5 out of 5 stars

(0)

Average rating of 5 out of 5 stars

(0)

Average rating of 5 out of 5 stars

(0)

Average rating of 5 out of 5 stars

(0)

Average rating of 5 out of 5 stars

(0)

Average rating of 3.8 out of 5 stars

(12)
Selina
US$ 29.00

Average rating of 5 out of 5 stars

(4)
Selina little
US$ 15.80

Albert

Reviews

Average rating of 5 out of 5 stars

(0)
Rate product

Albert

The Designer

Since the very start, I have had the privilege to co-develop and design products for Martin Stadler and the Stadler Form Team. What began with Fred, has grown into an attractive, small but fine range of products. This experience, and being part of the team, has greatly enriched myself and my work as a designer ...

Matti Walker

Learn more

Our recommendation

You might like that

360 Model

Average rating of 5 out of 5 stars

(0)
Albert
US$ 490.00

Average rating of 4.5 out of 5 stars

(7)
Albert little
US$ 416.00
WiFi
360 Model

Average rating of 5 out of 5 stars

(2)
Lukas
US$ 419.00
360 Model

Average rating of 4.4 out of 5 stars

(5)
Theo
US$ 269.00