Fred
€ 152.00
Product information Fred
When it gets colder outside, we heat our homes: the relative humidity falls. We, our furniture, plants and furnishings suffer in this dry environment. To counteract this Fred the humidifier gets up steam – making us feel comfortable again. Fred is clean – because the steam is free of minerals and bacteria. With metal plated feet, the vaporiser Fred’s feet are firmly on the ground.
Important purchasing advices
Room size
We recommend a more powerful humidifier for Minergie houses (low energy or passive houses) or apartments for which calculations should be based on twice the room size.
The reason for this lies in the continuous exchange of air: cold and dry outdoor air is heated up and channelled indoors. The moisture produced by people, animals, furniture, plants, cooking, showering, etc. is quickly directed outside by the continuous exchange of air, usually resulting in extremely dry air indoors. Controlled ventilation systems therefore have the same effect as open windows.
Water quality
If your water at home is very hard (from 14 °dH) or you use a water softener, we advise you not to use an ultrasonic nebuliser. With an ultrasonic nebuliser, the limescale (or the salt from the water softener) in the water will also be turned into tiny particles which will then settle as a white deposit. If you have hard water, we recommend using an evaporator (e.g. Oskar).
You can find out the hardness of your water using a test strip or even by contacting your local authority.
| Product family | Humidifier |
|---|---|
| System | Vaporiser |
| Color | white |
| Accessories (included) | Anti-limescale ball |
| Room size m² | 50 |
| Room size m³ | 125 |
| Capacity | 360 g/h |
| Power level | 2 |
| Power consumption | 150 / 300 W |
| Water tank capacity | 3.6 l |
| Noise level | 27 – 33 dB(A) |
| Weight | 2.9 kg |
| Dimensions | 363 x 267 x 363 mm |
Awards
Instruction manual and more
Good to know
Find important information here
Attention: Never immerse the device in water (danger of short-circuit).
Daily: Fill the water tank with fresh, cold tap water. If the device is not going to be used for several days, empty the water from the water tank beforehand and if necessary, clean it with a drop of washing-up liquid and a clean cloth. Fill the water tank with fresh water before putting the device into operation again. Video Cleaning the water tank
Weekly: Remove the steam tube, open the cover using the opening aid and then lift it off and remove the water tank. Then remove the cover for the heating plate and the seal. Clean both parts with a brush. Descale the anti-limescale ball and the heating plate with anti-stick coating using a commercial descaler and then rinse well. Let everything dry completely. Reassemble the device completely with all the parts before use.
At the end of the season: Before putting away the device at the end of the season, carry out descaling as described above and in the video. Then clean it thoroughly inside and out and let it dry completely. Insert a new anti-limescale ball so that your device will be ready to be put into operation at the start of the next season.
You can use commercial distilled water or mineral water as an alternative for Fred.
Accessories
Fred
The Designer
Since the very start, I have had the privilege to co-develop and design products for Martin Stadler and the Stadler Form Team. What began with Fred, has grown into an attractive, small but fine range of products. This experience, and being part of the team, has greatly enriched myself and my work as a designer ...
Our recommendation
You might like that
€ 49.00
Save € 10.00
