Alex
€ 249.00
Product information Alex
Alex is a high-performance fan heater and fan in one. The 2-in-1 device has Wi-Fi and can be easily controlled via the app. Despite his powerful performance and large wind distance, Alex works very quietly at the lowest setting. In fan mode you can choose between 4 speed levels and in heating mode between 2 – warming up or cooling down as required is guaranteed. When heating, the temperature can be precisely selected using a digital thermostat. Thanks to his IP 21 certification, Alex is splashproof and can be used in the bathroom. With the 1 to 7 h timer, the device switches off automatically. Alex offers a high level of comfort – all year round.
| Product family | Fan heater |
|---|---|
| System | Fan heater (wire) & fan |
| Color | titanium |
| Room size m² | 40 |
| Room size m³ | 100 |
| Power level | 2/4 |
| Power consumption | 1000/2000 W / 15 – 55 W |
| Noise level | 36 – 56 dB(A) |
| Weight | 5.3 kg |
| Dimensions | 234 x 308 x 245 mm |
Instruction manual and more
Video tutorials
2 in 1: heater & fan
Alex provides cosy warmth on cold days or turns into a fan at the touch of a button in summer, distributing. a refreshing breeze. With Alex, you can enjoy a comfortable climate whenever you need it.
Operation via Wi-Fi or remote control
Thanks to Wi-Fi, all functions can be controlled and monitored via app or with the magnetic remote control.
3D oscillation
Thanks to 3D oscillation, Alex swings horizontally and vertically with a range of up to 8 meters. This allows him to optimally distribute the warm or cooling air in the room.
Cosy warmth for your bathroom
Would you like to enjoy pleasantly warm air in your bathroom after a bath or shower? No problem with Alex. Thanks to his IP21 certification, the heater and fan is suitable for safe use in the bathroom (min. 50 cm distance to water sources).
Good to know
Find important information here
- Plug your Alex into the power supply and switch it on using the main switch on the back
- Press the WiFi button on the back of Alex until the LED on the front starts to flash
- Now take the remote control and press the ON/OFF button twice
- Now press and hold the “SPEED” and “TEMP” buttons on the remote control simultaneously via the plus (+) button
- As soon as the LED on the front of Alex stops lighting up, the remote control is connected
Accessories
Alex
The Designer
Since the very start, I have had the privilege to co-develop and design products for Martin Stadler and the Stadler Form Team. What began with Fred, has grown into an attractive, small but fine range of products. This experience, and being part of the team, has greatly enriched myself and my work as a designer ...
